首页 \ 关于远东

 3G三螺杆泵
 SM三螺杆泵
 SN三螺杆泵
 SPF三螺杆泵
 双螺杆泵
 单螺杆泵
 齿轮泵
 离心泵
 NYP高粘度泵
 不锈钢齿轮泵
 磁力驱动齿轮泵
 船用泵
 水电站专用螺杆泵
 真空泵
 离心机
 

 首页   关于远东    产品目录    销售网络    生产设备   技术支持    公司资质     联系我们
3GCLS110*2W21立式三螺杆泵用于给油船装卸脉动小,噪音低
   远东泵业生产的3GCLS110*2W21立式三螺杆泵在海洋和船舶工业上是非常成功的,无论是新船或者改造船,远东 3GCLS110*2W21立式三螺杆泵在装卸油方面有非常广泛的应用,并为机舱提供可靠的泵使用方案. Far east pump industry production gcls110 3 * 2 w21 vertical three-screw pump in Marine and shipbuilding industry is very successful, whether it is a new ship or reconstruction, the far east gcls110 3 * 2 w21 vertical three screw pump has very extensive application in loading and unloading oil, and provide reliable pump used for engine room.
    我公司生产的三螺杆泵拥有多种安装形式和性能范围,可满足各种工况需要,特别在石油工业上使用的供油船,如果泵效率和运行可靠被优先重视的话,那远东产品就是最好的选择.Our company produces the three screw pump has a variety of installations and performance range, can meet the needs of the various working conditions, especially used in the petroleum industry for oil tanker, if the pump is priority to efficiency and reliable operation, the far east, the product is the best choice.

    应用灵活和使用收益是泵解决方案的决定性因素,在造船工业上远东泵都能满足..远东双螺杆泵是经过检验而可靠的产品质量.当需要给油船装卸,为主柴油机润滑,排出舱底污水时,河北远东为这些和其他应用提供最佳方案.Flexible application and use of income is decisive factor, pump solutions in the shipbuilding industry in the far east pump can satisfy the...Far east double screw pump is a proven and reliable product quality. When you need to give oil tanker loading and unloading, main diesel engine lubrication, discharge the bilge, hebei far east for these and other applications to provide the best solutions
     3G螺杆泵流量范围0.2—590m /h,最高工作压力100bar,最高温度150℃.3 g screw pump flow range 0.2 590 m/h, maximum working pressure of 100 bar, the highest temperature of 150 ℃
    1.结构简单:3G螺杆泵具有多种结构形式,一般小流量0.2—6.5m/h,3G螺杆泵的泵体和衬套合为一个(统称泵体)轴封为端面机械密封。 中等流量以上3G螺杆泵的泵衬套为一单独的零件固定于泵体内,大流量3G螺杆泵多制成双吸结构卧式安装,轴封根据输送介质的不同有端面机械密封和填料密封两种。 船用3G螺杆泵的安装形式有卧式和立式两种、原动机为交、直流船用电动机。Simple structure: 3 g screw pump has many kinds of structure forms, generally small flow 0.2 6.5 m/h, 3 g screw pump pump body and bushing to a (generally referred to as the pump body) for the mechanical seal of the shaft sealing system.Secondary flow pump bushing of the above 3 g screw pump is fixed in the pump body, a separate big flow 3 g made more than double suction pump structure horizontal installation, depending on the medium of the shaft sealing has two kinds of mechanical seals and packing seal.Marine 3 g screw pump installations in both horizontal and vertical, prime mover for Marine ac or dc motor.
    2.寿命长:3G螺杆泵的主动螺杆由电动机驱动,主、从杆之间没有机械接触,而由所输压力液体驱使从悍绕轴心线自转,主,从杆之间、螺杆与衬套之间皆有一层油膜保护,因而3G螺杆泵的机械摩擦极小,寿命堪称半永久性。Long life: 3 g screw pump active screw driven by a motor, no mechanical contact between master and slave rod, and by a liquid pressure driven from welding around the axis rotation, Lord, from the rod between, between screw and bushing is a layer of oil film protection, so the 3 g screw pump mechanical friction small, life is a permanent.
    3.所输液体在3G螺杆泵内作轴向匀速直线运动,故压力脉动小,流量稳定,噪音低,由于3G螺杆泵转动部分惯性小,则起动力矩和振动很小。Of liquid in a 3 g screw pump axial uniform motion in a straight line, so the pressure pulsation, flow stability, low noise, due to the 3 g part screw pump rotational inertia small, small starting torque and vibration.
    4.3G螺杆泵具有高吸入能力。 3 g screw pump with high suction ability.
    5.为保证3G螺杆泵,电机及管路系统的安全,中等流量以上的螺悍泵均带有安全阀,当压力超过安全阀的设定压力时。高压油将回流至3G螺杆泵的进油口。 In order to ensure the 3 g screw pump, motor and the safety of the pipeline system, secondary flow above the screw welding pump with a safety valve, when pressure exceeds the set pressure of the relief valve.

    ● 3G三螺杆泵用途: 用来输送温度≤150℃,粘度5-760cSt,不含固体颗粒,无腐蚀性,具有润滑性能的介质。适用压力范围:0.6-2.5Mpa; 适用流量范围:0.6-123m3/h. 主要应用于燃油输送、液压工程、船舶工程,石化及其他工业。 Low 3 g three-screw pump USES: used to transfer temperature 150 ℃ or less and viscosity of 5 to 760 CST, not containing solid particles, non-corrosive, has the lubrication performance of the medium. Apply pressure range: 0.6 to 2.5 Mpa; Applicable flow range: 0.6-123 m3 / h. Mainly used in the fuel transfer, hydraulic engineering, Marine engineering, petrochemical and other industries.
    ● 优点: (1)介质为直线连续输送,无搅拌,无脉动; (2)振动小,噪音低; (3)压力高、效率高; (4)结构简单,拆装方便; (5)体积小重量轻; (6)磨损轻微,寿命长。 Low advantages: (1) medium for linear continuous transmission, without stirring, without a ripple; (2) the little vibration, low noise; (3) high pressure, high efficiency; (4) simple structure, easy to tear open outfit; (5) small size light weight, (6) minor wear and tear, long life.
    ● 结构特点: 一般采用机械密封(特殊要求,可选用磁力驱动,零泄露结构)。泵通过爪型联轴器由电动机驱动。从主轴外伸端向泵看,为顺时针旋转。 Features: low structure generally adopts mechanical seal (special requirements, can choose magnetic drive, zero leakage structure). Pump driven by motor through claw type coupling. To pump from the main shaft overhang end to see, for clockwise.
    ● 选泵注意事项 1、介质的润滑性,清洁度、腐蚀性。 2、介质的粘度,温度。3、介质进、出口压力,安装高度。4、使用场合的防爆要求。 5、订货时请注明规格、型号、设计使用压力、转速、介质粘度、温度、电机防爆级别、介质名称。 Choose low pump note 1, medium lubricity, cleanliness, corrosion resistance. 2, medium viscosity and temperature. 3, medium inlet and outlet pressure, the installation height. 4, use explosion-proof requirements. 5, when placing order, please indicate the type, model, design using pressure, rotating speed, medium viscosity, temperature, level of explosion-proof motor, name of medium.

相关产品及新闻
80CYZ-32自吸油泵和50cyz-20自吸油泵用于多家船厂用作洗舱泵
输送合成树脂采用NYP高粘度泵
输送聚氨酯泵选用什么泵
输送柴油采用CYZ自吸油泵
输送煤焦油泵使用什么泵(输送煤焦油泵)